Open and connect IMU based arcuate glove

For the opening of IMU based arcuate glove, please follow the below instructions. The IMU based arcuate glove is a special version. There is no IMU in the glove by default.

1

Before wearing gloves, please place the gloves flat on the table, facing straight ahead.

2

Long press the data box switch for 3 seconds (indicated in red box below). At this time, the indicator light on the data box pointed by the arrow turns red, indicating that initialization is in progress.

3

The red indicator light on the glove data box is on, indicating that the glove is initializing. Do not move the glove at this time, keep the glove level facing forward.

4

The blue indicator light on the glove data box is on, indicating that initialization is complete. At this time, you can connect to the HandDriver. If it does not turn into a blue light, it indicates that initialization has failed. Please press the switch on the data box (hold for 3 seconds to shut down), turn off the glove, and turn it back on until the blue light is on.

5

Wear gloves so that they are tightly attached to the skin, avoiding pulling too hard.