Charging & Washing

1. Charge the Gloves

1. The charging port is located on the side of the data box. Please use the charging adapter that comes with the product to charge the gloves.

2. Please charge the gloves with the gloves off. The indicator light flashes green when charging. After charging, the indicator light will automatically turn off.

3. After the gloves are turned on, if the indicator light flashes red during use, indicating that the battery is low, please charge it as soon as possible; if the indicator light goes out, indicating that the battery is exhausted, please charge it before use.

2. Glove Washing

1. If you need to wash with water, please disassemble the data box first, and then perform gentle manual rinsing. The water temperature should not exceed 30 degrees, and air dry vertically.

2. Do not dry clean, machine wash, bleach, cage dry or iron.

3. Data Box Disassembly and Installation

1. Square data box disassembly and installation

1. Arcuate data box disassembly and installation

4. Other Notes

1. Do not contaminate or corrode the smart gloves. Do not place the smart gloves roughly, outdoors, in liquids, humid or extremely high temperatures, or in other harsh environments, or use, corrode or oxidize them when the environment changes rapidly.

2. Do not unplug or disconnect the data cable, power adapter line, etc. while the software driver is being updated.